SPARS & RIGGING SOLUTIONS

MAST, RIGGING, SPARS, ROPES, WINCH

 
 
Aspar-rigging

HYDRAULICS - CYLINDERS

Click for original size image

A270 MAST JACK
The lightweight and compact is the ultimate tool for achieving the high rigging tension preloads in today's yacht. The jack may be permanently installed or used on a removable basis for additional weight savings. The jack may be used at 5,000 psi/7,500 psi with a Navtec panel or at 10,000 psi with an industrial pump.
A250S STAINLESS STEEL CYLINDERS
Navtec stainless steel cylinders represent the highest standard of performance and aesthetics worldwide, with highly polished 316 stainless construction throughout.
• Standard
• Long
• Flattening Reef
versions are available.
Titanium componentry optional.

Click for original size image

A250 CYLINDERS
Minimal Weight. Minimal windage. Maximum reliability. Navtec standard cylinder rods are made from 316 Stainless Steel. Tubes, lower clevis and caps are made of black hard-coated aluminum. Cylinder bores are specially polished for longer seal life.
Click for original size image A254 TRAVELER CYLINDER
For use in dual pull application, usually with a block and tackle incorporated. Navtec originally engineered these cylinders as a solution to operate main sheet travelers.
   
ASPAR-RIGGING 2012 --- web by SpinMedia
www.corderie-lancelin.fr www.navtec.net www.z-spars.com www.reckmann.com www.antal.it www.bamar.it www.nirvanabv.com www.wichard.com www.axxoncomposites.com www.lewmar.com www.profurl.com